Sokkia’s DT500, DT500A and DT600 are the most versatile electronic theodolits you can buy. With an IP66 dust and water resistance rating the DT500, DT500A and DT600 operate dependably even where conventional theodolites do not, such as in sudden showers, continuous drizzling rain, high humidity or dry, dusty construction sites.

Operates dependably even when other theodolites do not

The vertical and horizontal angles are electronically read and displayed on a large, easy to read, two-line LCD display. The automatic vertical circle indexing means you can achieve a level of accuracy not possible with other instruments in this price range. Two regular C-cell batteries are all that is needed to run the DTs, doubling the operating time.

All job functions are operated using only 4 keys: Illumination on/off key, “0” set key, Angle measurement mode selection key and Hold/Release key.

The Most Versatile Entry- level Instruments

IP66 protection rates the DT500 and DT600 water and dust resistant

Additional features include:

•      Optical plummet which eliminates the need for a plumb bob to set up over a point.
•      Percentage of slope or vertical angle display with the touch of a button.
•      Angle readings monitored by a self-checking microprocessor and displayed in less than .5 second.
•      Ability to read horizontal angles clockwise or counterclockwise; then lock with the hold/release key to hold angles.

The DT500 features displays on both sides of the instrument. The DT500A and DT600 have one display. All three instruments have selectable 5" or 10" readouts. Both the DT500 and DT500A have RS232 output. The DT500 has a dual axis liquid tilt sensor.

Versatility and dependability let you finish your job quickly and accurately